Sterilization Archives - Page 3 of 4 - Protectiva.nl – Professionele Medische en Hygiëneproducten

Showing 25–36 of 43 resultsSorted by latest

Product Code: 4AWTG

Washer Test (Glass)

(0 Reviews)

Data Sheet
4AWTG

Product Code: 4APLS

PLS Washer Test

(0 Reviews)

Data Sheet
4APLS

Product Code: 4AWTF

Washer Test Frame

(0 Reviews)

Data Sheet
4AWTF

Product Code: 4AWT

Cleaning and disinfection are critical aspects of the instruments reprocessing loop. That is why Washer Test is designed for validation and the routine monitoring of the cleaning efficiency of cleaning processes in washer disinfectors for surgical instruments. Washer Test is for fast and clear visual assessment of cleaning resuts. Each washer test is single use only. offers 3 different types of washing tests: Washer Test: This Washing Test does not have its own plastic frame, so it is necessary to use other frames or boxes. For this Washing Test is also manufacturing Wash Test Holder. Washer Test with Glass: Washer Test with Glass has its own frame and does not need any other frame or box. PLS Washer Test Indicator (4APLS): PLS Washer Test Indicator has been carefully designed to perform in an equivalent manner to ‘test soils’ by providing a realistic multiple challenge for the washer

Product Code: 4ADXR15

Hemo test

(0 Reviews)

Before the sterilization process of medical equipment and surgical instruments, there is a prewashing procedure. By the means of this procedure, blood residues remaining on especially surgical instruments that cause cross infection is surely cleaned. After Washing/Disinfection steps, there might be some residues or contaminants left in varying colors that can be observed. It is very essential to identify if the residue is of blood or corrosion, in order to carry out sterilization properly or otherwise to dispose the equipment. This blood residue test developed in our laboratories is an indicator which changes color only with a specific enzyme in the blood. By using this test, it is very easy to identify trace amounts of blood. Without a need of long incubation time, our test is able to identify up to~0.1micrograms of blood in residue, faster than any other test methods, that is as short as 10 seconds

Product Code: 4AC

Cannula Control

(0 Reviews)

Data Sheet
4AC

Cannula Control tests the effectiveness of washing devices as simulations of cannulated control lumen instruments. Thanks to the Cannula Control product, foresight (information) about the cleaning of the interior of lumen instruments is obtained. Washer Test Indicator is used to test the performance of the washing device. It is understood that the inner parts of lumen instruments are not cleaned if there is a blood stain on the test indicator.

Product Code: 4APRO

Protein Test

(0 Reviews)

Data Sheet
4APRO

Pro Test which is developed by our company, is an indicator which can be used safely at hospitals to determinate the effectiveness of the washing disinfection operations before sterilization. Protein residues on medical equipment are profiled by bacteries which results with an increase in the number of bacteria that causes a drawback for a proper sterilization. In addition, these kind of residues on these medical equipment are the sign of life forms that causes the risk for infection. To prevent these kind of infections, identification and cleaning of protein residues are obligatory.

Product Code: 4ASC

Sonicontrol

(0 Reviews)

Data Sheet
4ASC

Sonicontrol is a product which evaluates the preformance of Ultrasonic Washer Machines. It gives instant results thanks to color change. It changes from green to yellow. If there is no color change, it indicates that there is a problem in the washing device. The liquid inside the tubes shows that the machine is working successfully. The final control color change occurs with the energy given by the ultrasonic device.

Product Code: 4AIP

Incubator 37C/59C

(0 Reviews)

Data Sheet
4AIP

4A Medical Incubator is designed to incubate 4ASBI (24 hours) steam biological indicators for steam sterilization process, 4AEOBI Ethylene Oxide biological indicators for EO sterilization process and 4APBI plasma biological indicators for Hydrogen Peroxide sterilization process. Incubation temperatures vary depending on the indicator, because the microorganisms included within the Biological Indicators differentiate based on the sterilizing method for which they were created. Three incubation programs are available: MOD 1 – 48 hours at 370C for EO biological indicators, MOD 2 – 24 hours at 570C for steam biological indicators and MOD 3 – 24 hours at 600C for plasma biological indicators. The incubator makes it simple to identify positive and negative results for Biological Indicators. If the sterilization success is negative, the color of the culture media turns yellow. The color change should be interpreted that the sterilization was not successful.

Product Code: 4ASBI

Steam Biological Indicator

(0 Reviews)

Data Sheet
4AEOBI

Biological indicators are test systems containing viable microorganisms providing a defined resistance to a specific sterilization process. A biological indicator provides information on whether necessary conditions were met to kill a specified number of microorganisms for a given sterilization process, providing a level of confidence in the process. Steam Biological Indicator (3h and 24h) is specifically designed for the monitoring steam sterilization processes at 121 – 134 °C. The final readout of a processed biological indicator with respect to the indicator type should be made after 3 hours (4ARSBI) or 24h (4ASBI) of incubation at 60+/- 2 °C.

Product Code: 4AEOBI

EO Biological Indicator

(0 Reviews)

Data Sheet
4AEOBI

Biological indicators are test systems containing viable microorganisms providing a defined resistance to a specific sterilization process. A biological indicator provides information on whether necessary conditions were met to kill a specified number of microorganisms for a given sterilization process, providing a level of confidence in the process. 4A Ethylene Oxide Biological Indicator (4AEOBI) is specifically designed for the monitoring of ethylene oxide (EO) sterilization processes. The final readout should be made after 48 hours of incubation at 37+/- 2 °C.

Product Code: 4APBI

Plasma Biological Indicator

(0 Reviews)

Data Sheet
4APBI

Biological indicators are test systems containing viable microorganisms providing a defined resistance to a specific sterilization process. A biological indicator provides information on whether necessary conditions were met to kill a specified number of microorganisms for a given sterilization process, providing a level of confidence in the process. Plasma Biological Indicator (4APBI) is specifically designed for the monitoring of Hydrogen Peroxide sterilization processes. The final readout should be made after 24hours of incubation at 60+/- 2 °C.

Washer Test (Glass)

PLS Washer Test

Washer Test Frame

Washer Test

Hemo test

Cannula Control

Protein Test

Sonicontrol

Incubator 37C/59C

Steam Biological Indicator

EO Biological Indicator

Plasma Biological Indicator

Company Addresses

Need help

Poland Office

+48 793 194 307

USA Office

+1-323-38-36-795

Germany Office

+49 163 599 95 24

Holland Office

+31(0)684 74 10 51

Account

Information

Search

Sterilization(43)

Company Addresses

Social Icons

Need help

Poland Office

+48 793 194 307

USA Office

+1-323-38-36-795

Germany Office

+49 163 599 95 24

Holland Office

+31(0)684 74 10 51

Account

Information