Medical Paper provides maximum safety. For thick medical device packaging. All imprint are located outside the packaging area to prevent ink pigment migration to the product. Transparent , multilayer co-polymer film allows easy identification. Reinforced film to avoid tear during opening. Superior barrier and quality with 60gsm or 70gsm medical kraft paper. Indicators which are water based , non toxic and give accurate result for steam, EO Gas and Formaldehyde (FO) Strong seal-strength, visible sealing lines. Clean fibre-free opening.All materials comply with international standards. Opening direction marked. Conformity with EN 868-5Gusset Rolls has increased filling volume and can hold an increased amount of volume in comparison with Flat Reels.
Biological indicators are test systems containing viable microorganisms providing a defined resistance to a specific sterilization process. A biological indicator provides information on whether necessary conditions were met to kill a specified number of microorganisms for a given sterilization process, providing a level of confidence in the process. Steam Biological Indicator (3h and 24h) is specifically designed for the monitoring steam sterilization processes at 121 – 134 °C. The final readout of a processed biological indicator with respect to the indicator type should be made after 3 hours (4ARSBI) or 24h (4ASBI) of incubation at 60+/- 2 °C.
Medical Paper provides maximum safety. Pouches constructed from high grade medical kraft paper and multilayer transparent co-polymer film.Strong seal strength. Superior barrier and quality with 60gsm or 70gsm medical kraft paper.Indicators which are water based , non toxic and give accurate result for steam, EO Gas and Formaldehyde (FO) Strong seal-strength, visible sealing lines.Clean fibre-free opening.All materials comply with international standards. Opening direction marked.Conformity with EN 868-5. Gusset pouches have more internal volume comparing to flat pouches owing to the special design of the co-polymer film.Apart from those standard sizes, as long as the width is one of the standards, there is no limit at lengths. Gusset Pouches are packed as 100 pieces wrapped in film according to requested dimension.Note: Sterilization Bags can be produced with your trademark.
PCD- Helix Load Control Test has a self adhesive indicator on the far end. The PCD test kit has a 1 m long hose, and the Helix test kit has a 1.5 m long hose. There are 100 indicators in each package. In this product used for load control, the adhesive indicator is placed at the far end of the test apparatus, steam inlet only can be at the beginning of the hose and it can reach the chemical indicator at the end of the hose by passing at a single point. If the chemical indicator color change is achieved despite the difficult conditions, it is an important reference for the sterilization process in that load and should be recorded as a record for the successful sterilization of the load.
Security Seals are used in order to secure the container for opening by un-authorized staff. Container can be opened only by breaking the seal. Security seals are guaranteeing the sterility of materials from the moment of sterilization till the actual use.
4A Medical Incubator is designed to incubate 4ASBI (24 hours) steam biological indicators for steam sterilization process, 4AEOBI Ethylene Oxide biological indicators for EO sterilization process and 4APBI plasma biological indicators for Hydrogen Peroxide sterilization process. Incubation temperatures vary depending on the indicator, because the microorganisms included within the Biological Indicators differentiate based on the sterilizing method for which they were created. Three incubation programs are available: MOD 1 – 48 hours at 370C for EO biological indicators, MOD 2 – 24 hours at 570C for steam biological indicators and MOD 3 – 24 hours at 600C for plasma biological indicators. The incubator makes it simple to identify positive and negative results for Biological Indicators. If the sterilization success is negative, the color of the culture media turns yellow. The color change should be interpreted that the sterilization was not successful.
It is specifically made for Hydrogen Peroxide gas plasma sterilization. Transparent , multilayer co-polymer film allows easy identification. Reinforced film to avoid tear during opening Water based, Hydrogen Peroxide indicator. Strong seal-strength, visible sealing lines. Clean fibre-free opening. All materials comply with international standards. Opening direction marked. Conformity with EN 868-5. While it is compatible with Hydrogen Peroxide sterilization system, it’s also used for ethylen oxide and gamma sterilization if needed. Tyvek Pouches are products of which three sides are closed and one side needs to be closed by final user using closing machine before sterilization process.
Steam Autoclave Tape is an adhesive tape used in autoclaving to indicate whether a specific temperature has been reached. Autoclave Tapes have a Type 1 indicator. Steam Autoclave Tape works by changing color after exposure to steam sterilization processes. Tape also features a chemical indicator to verify that it has gone through the sterilization process. They are a safe solution for closing wrapping materials.
Reviews
There are no reviews yet.