Medical Paper provides maximum safety. For thick medical device packaging. All imprint are located outside the packaging area to prevent ink pigment migration to the product. Transparent , multilayer co-polymer film allows easy identification. Reinforced film to avoid tear during opening. Superior barrier and quality with 60gsm or 70gsm medical kraft paper. Indicators which are water based , non toxic and give accurate result for steam, EO Gas and Formaldehyde (FO) Strong seal-strength, visible sealing lines. Clean fibre-free opening.All materials comply with international standards. Opening direction marked. Conformity with EN 868-5Gusset Rolls has increased filling volume and can hold an increased amount of volume in comparison with Flat Reels.
Steam Chemical Indicators are the products that are put into each sterilization package and that indicate success of the sterilization. Type 6 Steam Chemical Indicators are cycle verification indicators that confirm the presence or absence of specific time, temperature and pressure parameters during a cycle. Type 6 Steam Chemical Indicator 3,5 minutes operates up to 15 minutes at 121°C or up to 3,5 minutes at 134°C. Type 6 Steam Chemical Indicator 7 minutes operates up to 20 minutes at 121°C and up to 7 minutes at 134°C. We have the following Type 6 Steam Chemical Indicator types: Besides standart Type 6 Steam Chemical Indicator 3,5 minutes we have Self – Adhesive Type 6 Steam Chemical Indicator 3,5 minutes and Perforated Type 6 Steam Chemical Indicator 3,5 minutes. Besides standart Type 6 Steam Chemical Indicator 7 minutes we have Self – Adhesive Type 6 Steam Chemical Indicator 7 minutes and Perforated Type 6 Steam Chemical Indicator 7 minutes.
SMS Wrapping Papers are packing covers used in the sterilization with plasma. They can be manifactured with different lenghts according to demand of the user. Only blue color is available.
Before the sterilization process of medical equipment and surgical instruments, there is a prewashing procedure. By the means of this procedure, blood residues remaining on especially surgical instruments that cause cross infection is surely cleaned. After Washing/Disinfection steps, there might be some residues or contaminants left in varying colors that can be observed. It is very essential to identify if the residue is of blood or corrosion, in order to carry out sterilization properly or otherwise to dispose the equipment. This blood residue test developed in our laboratories is an indicator which changes color only with a specific enzyme in the blood. By using this test, it is very easy to identify trace amounts of blood. Without a need of long incubation time, our test is able to identify up to~0.1micrograms of blood in residue, faster than any other test methods, that is as short as 10 seconds
Hydrogen Peroxide (Plasma) Tape is an adhesive tape used in plasma sterilization to indicate whether a specific gas has been exposed. Autoclave Tapes have a Type 1 indicator. Hydrogen Peroxide (Plasma) Tape works by changing color after exposure to sterilization processes. Tape also features a chemical indicator to verify that it has gone through the sterilization process. They are a safe solution for closing wrapping materials
Ethylene Oxide Indicators which are Type 5 indicators are chemical indicators which gives information about success of sterilization by using inside sterilization pouches together with ethylene oxide. Note: Products can be produced with your trademark
Medical Paper provides maximum safety. All imprint are located outside the packaging area to prevent ink pigment migration to the product. Transparent , multilayer co-polymer film allows easy identification. Reinforced film to avoid tear during opening. Superior barrier and quality with 60gsm or 70gsm medical kraft paper. Indicators which are water based, non toxic and give accurate result for steam, EO Gas and Formaldehyde (FO). Strong seal-strength, visible sealing lines. Clean fibre-free opening. All materials comply with international standards. Opening direction marked. Conformity with EN 868-5.
Cleaning and disinfection are critical aspects of the instruments reprocessing loop. That is why Washer Test is designed for validation and the routine monitoring of the cleaning efficiency of cleaning processes in washer disinfectors for surgical instruments. Washer Test is for fast and clear visual assessment of cleaning resuts. Each washer test is single use only. offers 3 different types of washing tests: Washer Test: This Washing Test does not have its own plastic frame, so it is necessary to use other frames or boxes. For this Washing Test is also manufacturing Wash Test Holder. Washer Test with Glass: Washer Test with Glass has its own frame and does not need any other frame or box. PLS Washer Test Indicator (4APLS): PLS Washer Test Indicator has been carefully designed to perform in an equivalent manner to ‘test soils’ by providing a realistic multiple challenge for the washer
Reviews
There are no reviews yet.